UT · LESSON 01 / 14
Ultrasonic Testing (UT) Level II
Your progress
0%
0 of 29 items done
Interactive Lessons
Interactive animated lessons with simulators and voice-over.
01 Uses of UT & CertificationOpen now
Ultrasonic PrinciplesLocked
Ultrasonic Equipment & ControlsLocked
Modes of Wave TravelLocked
Couplants & the Sound BeamLocked
Attenuation, Impedance & ResonanceLocked
Displaying IndicationsLocked
Transducers & Reference BlocksLocked
Immersion InspectionLocked
Contact TestingLocked
Applications of Contact TestingLocked
Non-relevant IndicationsLocked
DiscontinuitiesLocked
Identifying DiscontinuitiesLocked
Practical Simulator
Hands-on practicals on a virtual flaw detector: calibration, angle beam probes, DAC, laminations and weld inspection, with voice-over.
Your UT toolkitLocked
Reading the screen & controlsLocked
Straight-beam calibrationLocked
Dual probes & thickness gaugingLocked
Instrument performance checksLocked
Exit point & beam angleLocked
Angle-beam distance calibrationLocked
Sensitivity & DACLocked
Plate & lamination testingLocked
Weld inspection with an angle beam probeLocked
Equipment Practical Simulator
A virtual UT flaw detector for free practice: calibrate on the IIW block, check the angle and build a DAC on an SDH block, then inspect a weld plate and a laminated plate.
Workbook
Bilingual workbook, read right here.
Practical Guide
Bilingual practical guide for the 10 bench practicals, read right here.
Scan Plan Tool
Plan UT and PAUT scans for plates, pipes and T-joints, with coverage maps, A-scans and S-scans.
Question Bank
Practice questions by topic and a timed mock exam, in both languages.
Finish Course Early?
You have not completed all required lessons and assessments.
Your Progress
0%